FHXL-63 시리즈는 전류 제한 화재 경보 보호기(전류 제한 보호기)로 과전압, 저전압, 과전류, 누전, 온도 및 연기 감지를 위한 여러 보호 기능을 갖춘 종합 보호기입니다. 이 제품은 모듈화, 지능화, 시각화 등의 장점이 있습니다. 동시에 표준 Modbus485 통신 프로토콜을 지원합니다. 지침 : 지침전류 제한 화재 경보 프로텍터FHXL-63 매뉴얼

FHXL-63-0.jpg

호버링

FHXL-63-6.jpg

호버링

FHXL-63-4.jpg

호버링

FHXL-63-3.jpg

호버링

FHXL-63-2.jpg

호버링

FHXL-63-0.jpg

호버링

FHXL-63-1.jpg

호버링

FHXL-63-0.jpg
FHXL-63-6.jpg
FHXL-63-4.jpg
FHXL-63-3.jpg
FHXL-63-2.jpg
FHXL-63-0.jpg
FHXL-63-1.jpg
전체 화면

전류 제한 화재 경보 보호기 FHXL-63

, , , , , ,

FHXL-63 시리즈는 전류 제한 화재 경보 보호기(전류 제한 보호기)로 과전압, 저전압, 과전류, 누전, 온도 및 연기 감지를 위한 여러 보호 기능을 갖춘 종합 보호기입니다. 이 제품은 모듈화, 지능화, 시각화 등의 장점이 있습니다. 동시에 표준 Modbus485 통신 프로토콜을 지원합니다.
지침 : 지침전류 제한 화재 경보 프로텍터FHXL-63 매뉴얼

 소개


전류 제한 화재 경보 보호기
전류 제한 화재 경보 보호기

FHXL-63 시리즈는 전류 제한 화재 경보 보호기전류 제한 보호기)과전압, 저전압, 과전류, 누전, 온도 및 연기 감지를 위한 여러 보호 기능을 갖춘 종합 보호기입니다. 이 제품은 모듈화, 지능화, 시각화 등의 장점이 있습니다. 동시에 표준 Modbus485 통신을 지원합니다.

프로토콜을 지원합니다. 과전압, 저전압 및 과전류 보호와 같은 모든 보호 매개 변수는 전력 수요에 따라 설정할 수 있으므로 다음과 같은 경우 보호기가 전원 공급을 즉시 차단할 수 있습니다. 과전압라인에 저전압, 과전류 및 기타 결함이 발생하면 전기 장비가 손상되지 않도록 보호할 수 있습니다.

이 제품은 컴팩트한 구조와 아름다운 외관을 가지고 있으며 설치용 표준 가이드 레일이 있습니다.

Current protection parameters


유형 JGXL-63/3P+N
현재 사양 63A(1~63A)
과전압 설정 범위 AC270V(210~300V)
저전압 설정 범위 AC170V(80~200V)
작동 전압 AC230V/400V

Product functional features


■ Smoke and combustible gas protection function: When the smoke, liquefied petroleum gas, natural gas, propane, butane and other combustible gases in the electric field exceed the limit, the protector will emit an audible and visual alarm signal, automatically cut off the power supply, and display real-time fault records.
Short circuit protection function: The protector monitors the current of the power line in real time. When a short circuit fault occurs in the line, it can achieve fast current limiting protection within 0.1 seconds and display real-time fault records.

■ Overload protection function: When the current of the protected circuit is overloaded and the overload duration exceeds the action time (3-60 seconds can be set), the protector starts current limiting protection and displays real-time fault records.
Overvoltage protection function: When the protector detects under voltage or over-voltage in the line, it automatically cuts off the power supply and displays real-time fault records.

■ Distribution cable temperature monitoring function: When the temperature of the monitored cable exceeds the alarm set value, the protector automatically cuts off the power supply and displays real-time fault records.

■ Leakage current monitoring function: When the leakage of the monitored line exceeds the alarm set value, the protector automatically protects and cuts off the power supply, and displays the fault record in real time.

■ Communication networking function: The protector has one RS485 interface, which can send data to the background monitoring system, realizing the five remote functions of remote telemetry, remote signaling, remote control, remote adjustment, and remote viewing.

■ Simultaneous cutting of neutral and live wires: When a fault occurs in the circuit, the product cuts off both the neutral and live wires simultaneously, without the danger of live wires on the circuit due to the failure of the neutral wire to be cut off.

Overvoltage does not damage: When the three-phase power supply is misconnected, the maximum power supply voltage is at AC450V, and the product will disconnect within the set time, while the ground product itself will not be damaged due to high voltage.
Anti harmonic: Currently, the electricity consumption in the power grid is relatively complex, with a large number of harmonics present. Harmonic hazards can shorten the lifespan of other electrical equipment, but this product is not affected in harmonic power grids.
One click recovery function: When users are not proficient in product operation and cannot meet on-site protection requirements for parameter settings, they can easily restore the factory settings to avoid erroneous protection issues caused by improper operation.

근무 조건


1. 처음 정상적으로 전원을 켜면 1초 지연 후 장치가 자동으로 닫히고, 처음 전원을 켜면 과전압, 저전압, 과전류 및 누전 조건에서 3초 이내에 장치가 자동으로 열립니다;

2. 처음 전원을 켜면 연기 센서를 60초 동안 가열해야 제품이 보호 상태로 들어갑니다. 연기 경보가 발생하고 오류가 제거된 후 재설정 키를 2초 동안 수동으로 눌러야 연기 경보가 해제될 수 있습니다.

3. 현재 보호 매개변수:

a. 1.05배 이상의 전류, 3분 미만 개방.

b. 전류 1.2배 이상, 설정 범위 1~120초, 기본값 10초

c. 전류 ≥2배, 개방 시간 ≤0.2초.

4. 주변 온도는 +40°C를 초과하지 않아야 하며, -5°C보다 낮지 않아야 하고, 24시간 내 평균 온도는 +35°C를 초과하지 않아야 하며, +40°C에서 주변 공기 습도는 50%를 초과하지 않아야 합니다.

5. 설치 장소의 고도는 2000미터를 초과하지 않아야 합니다.

6. 오염 수준: III.

7. 설치 환경에는 폭발성 위험 매체, 부식성 및 파괴성 가스 및 전도성 먼지가 없어야 하며 비와 눈이 침입해서는 안 됩니다.

전류 제한 화재 경보 보호기는 키의 기능입니다.


1. 설정 키를 누릅니다: 설정 키를 2초간 길게 누르면 설정 상태로 들어갑니다. 설정 상태로 들어간 후 키를 누를 때마다 시스템이 다음 설정 메뉴로 들어갑니다;

2. Shift 키: 제품의 현재 실시간 작동 매개변수를 조회합니다. 설정 상태에서는 숫자 이동 기능이 있습니다;

3. 데이터 키: 제품의 마지막 고장 정보를 조회하고 설정 상태에서 설정할 파라미터를 변경합니다;

4. 리셋 키를 누릅니다: 첫 번째 과전류 또는 누전이 발생하면 지정된 리셋 시간이 지연된 후 제품이 자동으로 켜집니다. 두 번째 과전류, 누전 또는 화재 경보가 발생하면 회로에 이상이 없는지 확인한 후 리셋 키를 수동으로 눌러 제품을 켜고 리셋 키를 2초간 눌러야 설정 상태를 저장하고 종료할 수 있습니다.

표준 패키지 정보


상자 치수(cm) 팩 목록 수량 총 중량(kg)
45.5cm × 23.5cm × 31.5cm  보호자 60개 20kg

전류 제한 화재 경보 보호기 치수


 

fireproof-current-limiting-protector

 


지금 문의하세요, 무료 샘플 제공

제품 및 서비스에 대한 자세한 내용을 확인하려면,전기 전문가로부터 답변을 받으실 수 있으며,도와드리겠습니다.

Mob/WhatApp/Wang: +86 18958900126
이메일:sales@tokeep.net
 이메일:tokeepcc@gmail.com

맨 위로 스크롤