Arc Fault Circuit Interrupters (AFCI)it is assembled by a miniature circuit breaker and an arc fault protection module, and has protection functions such as overload, short circuit, and arc fault protection.
AFCI Suitable for communication 50Hz, rated voltage 230V, rated current to 63AIn the following lines, it is used to protect the overcurrent of the lines of buildings and similar purposes, and at the same time, it can detect many fire risks caused by the rupture of electrical devices or the aging of wires in advance, and protect against grounding arc faults, parallel arc faults and series arc faults. To a certain extent, the occurrence of fire safety accidents has been reduced, and the safety of people’s lives and property has been effectively protected.

JGAFCI-63-2 zoom

Survolez

JGAFCI-63-3 zoom

Survolez

JGAFCI-63-4 zoom

Survolez

JGAFCI-63-2 zoom

Survolez

JGAFCI-63-1 zoom

Survolez

JGAFCI-63-2
JGAFCI-63-3
JGAFCI-63-4
JGAFCI-63-2
JGAFCI-63-1
Plein écran

Interrupteurs de circuit à défaut d'arc JGAFCI-63

, , , ,
Arc Fault Circuit Interrupters (AFCI)it is assembled by a miniature circuit breaker and an arc fault protection module, and has protection functions such as overload, short circuit, and arc fault protection.
AFCI Suitable for communication 50Hz, rated voltage 230V, rated current to 63AIn the following lines, it is used to protect the overcurrent of the lines of buildings and similar purposes, and at the same time, it can detect many fire risks caused by the rupture of electrical devices or the aging of wires in advance, and protect against grounding arc faults, parallel arc faults and series arc faults. To a certain extent, the occurrence of fire safety accidents has been reduced, and the safety of people’s lives and property has been effectively protected.

Introduction


Arc Fault Circuit Interrupters
Arc Fault Circuit Interrupters

Arc Fault Circuit Interrupters (AFCI)it is assembled by a miniature circuit breaker and an arc fault protection module, and has protection functions such as overload, short circuit, and arc fault protection.

    Arc Fault Circuit Interrupters (AFCI) Suitable for communication 50Hz, rated voltage 230V, rated current to 63AIn the following lines, it is used to protect the over current of the lines of buildings and similar purposes, and at the same time, it can detect many fire risks caused by the rupture of electrical devices or the aging of wires in advance, and protect against grounding arc faults, parallel arc faults and series arc faults. To a certain extent, the occurrence of fire safety accidents has been reduced, and the safety of people’s lives and property has been effectively protected.

AFCI Product features


a)Protection contre les surcharges et les retards importants ;

b)Protection contre les surcharges et les courts-circuits ;

c)Instantaneous trip protection ;

d)Series de protection contre les arcs électriques ;

e)Parallel arc fault protection ;

Protection contre les arcs électriques ;

g)Multiples spécifications de courant.

AFCI working  and installation conditions


aTempérature de l'air ambiant

La température de l'air ambiant n'est pas supérieure à+70℃,Pas moins de-35℃,24La moyenne des heures ne dépasse pas+35℃;.

Note : La température de l'air ambiant est supérieure à 70℃ou inférieure à 35℃conditions d'utilisation AFDD La protection contre les défauts de l'arc est désactivée Le roader doit être négocié avec le fabricant ;

bAltitude:

L'altitude du site d'installation ne dépasse pas 2000m;.

cConditions atmosphériques

L'humidité relative de l'atmosphère est à sa température la plus élevée dans l'environnement+60℃temps pas dépassé 50%, qui peut avoir une phase plus élevée à des températures plus basses à l'humidité, par exemple 20℃temps 90%, pour la condensation occasionnelle due à des changements de température, des mesures de protection doivent être prises ;

dConditions d'installation

Protection contre les défauts d'arcLe champ magnétique externe à proximité du site d'installation ne doit pas dépasser le champ géomagnétique dans n'importe quelle direction5Fold ; La position d'installation doit être verticale, et l'inclinaison dans toutes les directions ne doit pas dépasser 10°; Installé dans un endroit où il n'y a pas de vibration de choc et pas de pluie ou de neige Square ; Adopter les normes TH35-7.5 section acier installation du rail d'installation ;

Niveau de pollution électronique : niveau 2

fCatégorie d'installation:ⅢKind ;

gIngression Protection:IP20(Installé dans un coffret de distribution, une armoire de distribution ou une boîte.) IP40);

Lors du câblage, le fil neutre doit être connecté à la marque N Identification des pôles.

Informations sur le paquet standard


 

Dimension du carton (cm) Liste de colisage QTÉ Poids brut (kg)
45,5cm × 23,5cm × 31,5cm  protecteur 120pcs 20 kg

Contactez-nous dès maintenant, des échantillons gratuits sont disponibles


Pour obtenir plus d'informations sur nos produits et services, vous recevrez une réponse d'un expert en électricité.

Mob/WhatsApp/WeChat/Wang: +86 18958900126
Courriel :tokeepcc@gmail.com
Email:wxj7607@126.com

Retour en haut